Basic Thread Dimensions
| Property | Inch | mm |
|---|---|---|
| Nominal Diameter | 0.875 | 22.225 |
| Pitch (TPI) | 14 | |
| Pitch (Distance) | 0.0714 | 1.814 |
| Pitch Diameter | 0.8286 | 21.046 |
| Minor Diameter | 0.7899 | 20.063 |
| Thread Height | 0.0387 | 0.983 |
| Addendum | 0.0232 | 0.589 |
| Crest (External) Root (Internal) | 0.0089 | 0.226 |
| Tap Drill Size (75% depth) | 0.805 | 20.46 |
| Lead Angle (Single Start) | 1.57° | |
| Thread Family | Unified Fine Pitch (UNF) | |
| Relevant Standards | ASME B1.1-2003 | |
| Equivalent MetricThread | M22 X 2 |
For more threading data scroll down, or use the Thread Calculator
Choose the Threading Data you want to explore
Tolerance Classes
Thread Milling Gcode
Turning Gcode
Over Wire
Tap Drill Size
Tolerance Classes
Thread Milling Gcode
Turning Gcode
Over Wire
Tap Drill Size
7/8 - 14 UNFPossible Thread Classes
External Threads
2A, 3A
Internal Threads
2B, 3B
7/8 - 14 UNF 2A (External)
* Permisable values for thread Class 2A# Description Value (Inch) Value (mm) es Allowance 0.0015 (Ref) 0.038 (Ref) d Major Diameter 0.8632 - 0.8735 21.925 - 22.187 d2 Pitch Diameter 0.8222 - 0.8271 20.884 - 21.008 d3 Minor Diameter
(UNR Only)0.7885 (Ref) 20.028 (Ref) α Varation of 30° anngle (+/-) 0.9167° P Varation of pitch (+/-) 0.0014 (Ref) 0.036 (Ref)
* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator'
* Back to Thread Class Selection
7/8 - 14 UNF 3A (External)
* Permisable values for thread Class 3A# Description Value (Inch) Value (mm) es Allowance 0 (Ref) 0 (Ref) d Major Diameter 0.8647 - 0.875 21.963 - 22.225 d2 Pitch Diameter 0.8249 - 0.8286 20.952 - 21.046 d3 Minor Diameter
(UNR Only)0.7899 (Ref) 20.063 (Ref) α Varation of 30° anngle (+/-) 0.9167° P Varation of pitch (+/-) 0.0011 (Ref) 0.028 (Ref)
* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator'
* Back to Thread Class Selection
7/8 - 14 UNF 2B (Internal)
* Permisable values for thread Class 2B# Description Value (Inch) VValue (mm) D1 Minor Diameter 0.798 - 0.814 20.269 - 20.676 D2 Pitch Diameter 0.8286 - 0.835 21.046 - 21.209 D Major Diameter 0.8750 (Min) 22.225 (Min) α Varation of 30° anngle (+/-) 0.9167° P Varation of Pitch (+/-) 0.0018 (Ref) 0.046 (Ref)
* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator
* Back to Thread Class Selection
7/8 - 14 UNF 3B (Internal)
* Permisable values for thread Class 3B# Description Value (Inch) VValue (mm) D1 Minor Diameter 0.7977 - 0.8068 20.262 - 20.493 D2 Pitch Diameter 0.8286 - 0.8334 21.046 - 21.168 D Major Diameter 0.8750 (Min) 22.225 (Min) α Varation of 30° anngle (+/-) 0.9167° P Varation of Pitch (+/-) 0.0014 (Ref) 0.036 (Ref)
* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator
* Back to Thread Class Selection
Tap Drill Sizes for 7/8 - 14 UNF
- If not specified, assume a thread depth of 75%.
- You can learn more about thread depth in tapping here.
- To get the tap drill size in other depths, use our Tap Drill Size Calculator .
| Thread Depth | Tap Drill Size (Inch) | Tap Drill Size (mm) |
|---|---|---|
| 55% | 0.824 | 20.93 |
| 60% | 0.819 | 20.81 |
| 65% | 0.815 | 20.69 |
| 70% | 0.810 | 20.57 |
| 75% | 0.805 | 20.46 |
| 80% | 0.801 | 20.34 |
| 85% | 0.796 | 20.22 |
Over Wire Measurements for 7/8 - 14 UNF
* OverWire is a measuring method to obatin the pitch diameter of threads. It is mostly used when a manufacturer does not have a Go/Nogo gauge for a thread. You can learn more about it here
| Inch | mm | |
|---|---|---|
| Permissible Wire Diameter Range | 0.0361 - 0.0721 | 0.916 - 1.832 |
| Ideal Wire Diameter | 0.0412 | 1.047 |
| Possible Wires From Standard Sets | * 0.0642 | * 1.01 * 1.155 * 1.443 * 1.732 |
Once you know your wire diameter, you need to find out what is the premissable Measurement for your pitch diameter (Depending on the class). Use our Over Wire Calculator to find out!
CNC Gcode Program for Turning of 7/8 - 14 UNF
The below sample Gcode is configured for:
- Fanuc Controller
- External RH Thread
- Right hand tool, machining towards the chuck
- Flank Infeed method with contant volume
- Flank Infeed method with contant volume
- Cutting conditions for steel
- Default number of passes
You can configure all the above parameters and much more in our ThreadTurningGcodeGenerator
%O0100(MACHINING DOCTOR - THREADING CNC PROGRAM)(CONTROLER - FANUC A)(THREAD - )(D=0.875 INCH, P=0.071 INCH, L=0.714 INCH)(APPLICATION - EXTERNAL TURNING, TOWARDS CHUCK, RH TOOL, RH THREAD)(FEED - 17 PASSES, FLANK, CONSTANT VOLUME)(FINISH PASS - 0.0007 INCH)(WITH CHAMFER - NO)G28 U0G28 U0T0100G99 G97 S1310 M03G00 Z5.4G00 X27.5 M08G76 P010060 Q18 R0G76 X20 Z-18 P1113 Q266 F2 RG28 U0G28 U0M09M30(PLEASE NOTE THIS GCODE HAS NOT BEEN TESTED ON YOUR MACHINE AND SETUP. WE CANNOT GUARANTEE ITS ACCURACY OR COMPATIBILITY. NOTE THAT YOU ARE USING IT AT YOUR OWN RISK, AND WE SHALL NOT BE HELD LIABLE FOR ANY DAMAGES OR LOSSES ARISING FROM THE USE OF THIS PROGRAM.)%CNC Gcode Program for Thread Milling of 7/8 - 14 UNF
The below sample Gcode is configured for:
- Fanuc Controller
- Internal RH Thread
- Climb Milling
- Cutter diameter: 70% of the thread diameter
- Single tooth Thread Mill cutter
- Cutting conditions for steel
- One radial pass
You can configure all the above parameters and much more in our ThreadMillingGcodeGenerator
%O0101(WWW.MACHININGDOCTOR.COM - THREADMILLING PROGRAM)(CONTROLER - FANUC)(THREAD - MAJOR DIAM.=0.875 INCH, PITCH=0.071428571428571 INCH, LENGTH=0.71428571428571 INCH)(APPLICATION - INTERNAL, RH THREAD, CLIMB MILLING)(CUTTER DIAM=0.4375 [SINGLE TOOTH])(CUTTER COMPENSATION D=0 - TOOLPATH FOR TOOL CENTER)N1 M06 T1G54G90 G40 G17 G94 G21G00 X0 Y0 S2619 M03G43 H1 Z25.4 M08(M-CODE "THROUGH COOLANT ON")(PASS 1 / 1)G90 G01 Z-18.3696 F2032G91 G01 G41 D1 X2.7781 Y-2.7781 F399G03 X2.7781 Y2.7781 Z0.2268 I0 J2.7781 F100G03 Z1.8143 I-5.5563 J0 F200G03 Z1.8143 I-5.5563 J0G03 Z1.8143 I-5.5563 J0G03 Z1.8143 I-5.5563 J0G03 Z1.8143 I-5.5563 J0G03 Z1.8143 I-5.5563 J0G03 Z1.8143 I-5.5563 J0G03 Z1.8143 I-5.5563 J0G03 Z1.8143 I-5.5563 J0G03 Z1.8143 I-5.5563 J0G03 X-2.7781 Y2.7781 Z0.2268 I-2.7781 J0G01 G40 X-2.7781 Y-2.7781 F2032G90 G00 Z25.4M30(PLEASE NOTE THIS GCODE HAS NOT BEEN TESTED ON YOUR MACHINE AND SETUP. WE CANNOT GUARANTEE ITS ACCURACY OR COMPATIBILITY. NOTE THAT YOU ARE USING IT AT YOUR OWN RISK, AND WE SHALL NOT BE HELD LIABLE FOR ANY DAMAGES OR LOSSES ARISING FROM THE USE OF THIS PROGRAM.)%